SalesEZ settings
The following settings are included in the ScanMan.INI file the first time ScanMan module is launched and pertain to the connection to SalesEZ application:
Setting | Value |
IP | 127.0.0.1 |
Port | 4203 |
Unit ID | See text |
Rollover | 8 (tenths of a second) |
Timeout | 30 (tenths of a second) |
TrickleDelay | 100 (tenths of a second) |
TrickleInterval | 30 (tenths of a second) |
All times are in tenths of a second, so a value of
30 means three seconds. Rollover month is set to the middle of the off-season (see later
section for more on this). Unit ID is used in calls as the salespoint name and is distinct from other ScanMan units and salespoints.
Operator and Location are also used in communication with SalesEZ application, but are set on the unit upon launching ScanMan module.
The above settings are configurable on the unit through the Config dialog. Other settings must be specified in a ScanMan.INI file in the same folder as the program on the Symbol device.
Note: Please see the section
Advanced Features for more options that can be set.
