Setting | Description |
SETLOC | Sets the location |
SETAUTOLOC | Automatically set a location at startup |
SETOP | Sets the operator |
SETAUTOOP | Automatically set an operator at startup |
SETIP | IP address to connect to SalesEZ application |
SETPORT | Port to connect to SalesEZ application |
SETTO | Timeout in tenths of a second for SalesEZ application to timeout; usually three seconds or SETTO30 |
SETTD | Trickle delay in tenths of a second |
SETTI | Trickle interval in tenths of a second |
SETID | Unit ID |
SETROLL | Rollover month |
SETPRE | Characters to pre-pend to any scan |
SETEXT | Extract command to use |
SETDCI | DCI to pass for validation purposes |
SETLOG | Log verbosity |
SETEXP | Whether to react to expiration dates (1=enabled) SETEXP0 shuts off expiration dates |
SETCARD | List of prefixes to associate with cards |
SETCON | Attempt to enable Config menu by passing code |
SETLO | Whether LOC and OP can be used without the SET prefix (0 means you can) |
SETIS34 | Is this being used with Salesware version 3.4 (1 means it is) |
SETCNTR | Set the counter (1 means it’s on) |
SETRECINT | Set reconnect interval |
SETCPN | Set checkpoint name |
SETCPV | Set checkpoint value |
SETHOTLIST | Tells you how many Hotlist entries there are |
SETNODEC | Set the prefixes that are not decrypted |
SETWAV | Set delay for WAV file (in tenths of a second) |
SETRF | Activate RF support (1 means it is active) |
SETPIC | Activates viewing of pictures |
SETPINT | Sets auto-display of picture interval (tenths of a second) |
SETGITEXT | Sets text to show below picture |
